Bronze Double Regulating Balancing Valve, With Nozzle

Product Standard : BS 7350
Screwed BSP Female Ends
Provides precise and accurate flow regulation.
Tamper proof setting by a built-in locking device
Provided with integral two test points – red for high pressure & blue for low pressure
Hand wheel operated and easy to install
Helps in rectifying human errors in system design and installation
Enhances higher flow rate and minimizes pressure drop
PTFE sealing disc to ensure proper shut off
Size Range : 15mm to 50mm

Body : 348 PSIG Hyd.
Seat : 232 PSIG Hyd. at an ambient temperature up to 45°C
Max. Working Temperature : 200°C

Our Works Test Certificate

Water

84818020

PNo.	Part	Nos.	Material	Standard
1	Set Screw / Bolt	1	M.S.	IS:1367
2	Washer	1	M.S.	IS:226
3	Handwheel	1	Cast Iron / M.S.	IS:210 Gr.FG200 / IS:226
4	Upper Stem	1	Brass	IS:6912 Gr. FLB
5	Gland Nut	1	G.M.	IS:318 Gr. LTB2
6	Washer	–	Teflon	BS EN 12086-1
7	Check Nut	1	G.M.	IS:318 Gr. LTB2
8	Bonnet	1	G.M.	IS:318 Gr. LTB2
9	Gasket	1	PTFE	BS EN 12086-1
10	Lower Stem	1	G.M.	IS:318 Gr. LTB2
11	Disc Holder	1	G.M.	IS:318 Gr. LTB2
12	Disc Ring	1	Teflon	BS EN 12086-1
13	Washer	1	Brass/ M.S.	IS:6912 Gr. FLB / IS:226
14	Disc Nut	1	Brass / M.S.	IS:6912 Gr. FLB / IS:226
15	Locking Pin	–	Brass / M.S.	IS:6912 Gr. FLB / IS:226
16	Body	1	G.M.	IS:318 Gr. LTB2
17	Plug	1	Brass	IS:6912 Gr. FLB
18	Cap Holder	1	PVC	–
19	Cap	1	Brass	IS:6912 Gr. FLB
20	Cap Washer	1	Synthetic Rubber / Teflon	BS EN 12086-1
21	Memory Rod	1	S.S. 18/8% Cr. / Ni.	AISI 304

Nominal Size (Inches)	Nominal Size (mm)	L ±1.5	T	H	W	MRP / Piece
1/2	15	65	1/2	72	60	–
3/4	20	75	3/4	72	60	–
1	25	90	1	97	60	–
1.1/4	32	110	1.1/4	97	75	–
1.1/2	40	120	1.1/2	127	80	–
2	50	150	2	130	80	–

Nominal Size (Inches)	Nominal Size (mm)	L ±1.5	T	H	W	MRP / Piece
1/2	15	65	1/2	72	60	–
3/4	20	75	3/4	72	60	–
1	25	90	1	97	60	–
1.1/4	32	110	1.1/4	97	75	–
1.1/2	40	120	1.1/2	127	80	–
2	50	150	2	130	80	–