Cast Iron Sluice Valve (Bronze Working Parts)

Design Standard conforming to IS:14846
Flanged Ends to IS:1538
Bolted bonnet, Outside Screw, With renewable Bronze working parts and non-rising stainless steel stem
Thrust plate design is provided upto 150mm size.
Ample depth of stuffing box is provided for re-gland packing under pressure.
Streamlined full flow area is provided in the body to minimize pressure drop
Application :
– Fertilisers, Paper & Pulp
– Water / Effluent / Sewage treatment plants
– HVAC & Firefighting
– Power & Energy, Oil & Gas

Shell : 2.4 MPa
Seat : 1.6 MPa

Works Test Certificate can be issued, if required.

Water

84818010

PNo.	Part	Nos.	Material	Standard
1	Handwheel Bolt	1	M.S.	IS:1367
2	Washer	1	M.S.	IS:226
3	Handwheel	1	Cast Iron	IS:210 Gr.FG200
4	Stem	1	S.S. 13% Cr.	ASTM A182 Gr. F6a / AISI-410
5	Gland Flange	1	Cast Iron	IS:210 Gr.FG200
6	Gland Packing	–	Asbestos	IS:4687
7	Thrust Plate	1	Cast Iron	IS:210 Gr.FG200
8	Bonnet	1	Cast Iron	IS:210 Gr.FG200
9	Body Bonnet Studs Nuts	To Suit	M.S.	IS:1367
10	Gasket	1	Rubber	IS:638 Type B
11	Body	1	Cast Iron	IS:210 Gr.FG200
12	Stem Nut	1	Bronze	IS:318 Gr.LTB2
13	Body Seat Ring	2	Bronze	IS:318 Gr.LTB2
14	Wedge Facing Ring	2	Bronze	IS:318 Gr.LTB2
15	Wedge	1	Cast Iron	IS:210 Gr.FG200
16	Gland Nut	2	M.S.	IS:1367
17	Gland Bolt	2	M.S.	IS:1367

Nominal Size (Inches)	Nominal Size (mm)	A	B	H	W	MRP / Piece
2	50	178	50	368	280	–
2.1/2	65	190	65	392	280	–
3	80	203	80	423	280	–
4	100	229	100	468	360	–
5	125	254	125	542	360	–
6	150	267	150	590	360	–
8	200	292	200	730	450	–
10	250	330	250	835	640	–
12	300	356	300	912	640	–

Nominal Size (Inches)	Nominal Size (mm)	A	B	H	W	MRP / Piece
2	50	178	50	368	280	–
2.1/2	65	190	65	392	280	–
3	80	203	80	423	280	–
4	100	229	100	468	360	–
5	125	254	125	542	360	–
6	150	267	150	590	360	–
8	200	292	200	730	450	–
10	250	330	250	835	640	–
12	300	356	300	912	640	–